How to Build a Wargaming Table

DIY wargaming table with terrain and miniatures

Building your own wargaming table is one of the most rewarding hobby projects you can undertake. A dedicated gaming surface transforms your playing experience — no more warping dining tables, sliding mats, or cramped makeshift setups. A purpose-built wargaming table gives you a stable, appropriately sized surface with storage, proper height, and a playing area designed specifically for miniature wargaming.

The good news is that building a wargaming table does not require advanced woodworking skills or expensive tools. A basic table can be built with common hardware store materials in a single weekend. This guide walks you through the process from planning to finishing, with options for every budget and skill level.

What Size Should a Wargaming Table Be?

Table size depends on which games you play. Warhammer 40k 11th Edition matched play uses a 44×60-inch (roughly 110×152 cm) battlefield for both 1,000-point Incursion and 2,000-point Strike Force games. A standard Age of Sigmar battle uses a similar 44×60 surface. Kill Team needs only 22×30 inches. Smaller games like Warcry and Underworlds use even more compact surfaces.

Build your table to accommodate the largest game you regularly play, then use boards or mats to subdivide it for smaller games. A 4×6-foot (120×180 cm) table surface is the most versatile standard size — it comfortably fits a 40k or AoS game with room for books, dice, and casualties along the edges.

If space is a concern, consider a 4×4-foot table. This accommodates Kill Team, Warcry, Spearhead and other smaller formats comfortably (check the current rules for each format’s exact board size). You can extend it to 4×6 with a removable leaf when needed. Some players build folding tables that collapse against a wall when not in use — a practical solution for small apartments.

Table height is often overlooked but matters for comfort during long games. Standard dining table height (28 to 30 inches) works well for seated play. Standing-height tables (36 to 42 inches) are popular among wargamers because they reduce back strain during games that can last several hours and make it easier to reach the centre of a large board. Choose the height that works for your group’s preferences.

What Materials Do You Need?

The table surface is the most important component. Medium-density fibreboard (MDF) is the most popular choice — it is flat, smooth, affordable, and easy to cut. A 4×6-foot sheet of 18mm MDF provides an excellent gaming surface. Plywood is an alternative that is lighter and more resistant to moisture but may have surface imperfections that affect model stability.

For the frame, standard 2×4 lumber (or 50x100mm timber) provides more than enough structural strength. You will need four legs, four frame rails, and optional cross-braces for rigidity. Softwood like pine is perfectly adequate and easy to work with. Hardwood is overkill for a gaming table unless you want a furniture-quality finish.

A basic materials list for a 4×6-foot table includes: one sheet of 18mm MDF (cut to 4×6 feet or purchased pre-cut), eight 2×4 boards at 8-foot lengths, wood screws (75mm for frame joints, 40mm for surface attachment), wood glue, sandpaper (120 and 220 grit), and your choice of finish (paint, stain, or varnish).

Optional upgrades include a raised lip around the table edge to prevent dice and models from falling off, felt or neoprene gaming mat on the surface, under-table storage shelves, built-in cup holders, and LED strip lighting for atmosphere. These extras can be added during construction or retrofitted later.

How Do You Build the Frame?

The frame is a simple rectangular structure. Cut two long rails at 72 inches (for a 6-foot table) and two short rails at 48 inches (for a 4-foot table). These form the outer rectangle. Join them at the corners using wood screws and glue — pre-drill your screw holes to prevent splitting.

Add a centre cross-brace running the width of the table to prevent the MDF surface from sagging. For a 6-foot table, two cross-braces at the one-third and two-third points provide excellent support. Attach these cross-braces with screws driven through the long rails into the ends of the cross-braces.

Cut four legs at your desired height. For a 36-inch standing table, cut legs at approximately 34.5 inches (accounting for the thickness of the frame rails and surface). Attach legs at the inside corners of the frame using two or three screws per leg driven through the frame rails into the leg. Add wood glue for extra strength.

For additional stability, add diagonal braces between the legs and the frame rails. These are not strictly necessary for a table that will not be moved frequently, but they prevent wobbling and racking. Cut the braces at a 45-degree angle and screw them into both the leg and the rail.

Test the frame for wobble before attaching the surface. Place it on the floor and push gently from each side. If it racks (shifts into a parallelogram shape), add diagonal bracing until it is rigid. A wobbly table will drive you mad during games.

How Do You Finish the Surface?

Sand the MDF surface with 120-grit sandpaper to remove any manufacturing marks, then follow with 220-grit for a smooth finish. Wipe away all dust with a damp cloth and let it dry completely before finishing.

For a painted surface, prime the MDF with a shellac-based primer (regular latex primer can cause MDF to swell). Once primed, paint the surface with a matte latex paint in your preferred colour. Dark green and brown are classic wargaming colours. Apply two coats, sanding lightly between coats with 220-grit sandpaper.

Alternatively, skip painting the surface entirely and plan to use a gaming mat. Neoprene gaming mats from specialist makers provide gorgeous, purpose-made playing surfaces with printed terrain features. If you are using a mat, the MDF surface just needs to be smooth and clean — no painting required.

If you want a textured surface built directly into the table, apply a coat of PVA glue mixed with fine sand before painting. This creates a rough, terrain-like texture that looks great for open-field battles. Paint the textured surface with earth tones and drybrush with lighter colours for a natural ground effect. The downside is that textured surfaces are harder to clean and may not sit flat under a gaming mat.

Not sure which army to collect? Answer 7 quick questions and get matched to your faction.
Take the army quiz →
Share:

Seal the finished surface with a matte varnish to protect the paint from scratches, dice impacts, and spilled drinks. Two coats of polyurethane varnish (water-based is easier to apply and less toxic) will protect the surface for years of gaming.

How Do You Add Storage and Accessories?

Under-table storage is one of the biggest advantages of a purpose-built gaming table. Add a shelf between the legs by cutting a piece of plywood or MDF to fit within the frame and supporting it on cleats (small strips of wood screwed to the inside of the legs). This shelf can hold terrain, rulebooks, army transport cases, and supplies.

A raised lip around the table edge prevents dice and models from rolling off. Cut strips of 1×2 lumber to the length of each table edge and attach them with screws and glue. A 1-inch lip is sufficient to catch most dice without interfering with gameplay. Some players prefer a 2-inch lip that doubles as a small shelf for holding drinks, wound trackers, and Command Point counters.

Built-in dice trays can be created by routing or cutting a shallow rectangular depression into the MDF surface near each player’s position. Line the depression with felt to dampen dice noise. This keeps dice rolls contained and prevents them from scattering across the battlefield and knocking over models.

If you plan to move the table occasionally, add heavy-duty locking casters to the bottom of each leg. These allow the table to be wheeled into position and then locked firmly in place for play. Choose casters rated for at least the total weight of the table plus a safety margin.

Consider adding hooks or clips along the table edge for holding tape measures, templates, and bags. These small additions keep the playing surface clear and game tools within easy reach. Command strip hooks work well for this purpose and can be repositioned as needed.

What Are Some Advanced Options?

A recessed playing surface is a popular upgrade for serious gamers. Instead of a flat table with a raised lip, you build the table with a recessed well that the playing surface sits inside. This creates deeper walls around the gaming area, provides a natural surface for resting books and drinks outside the play area, and can be covered with a topper board to convert the table into a regular dining or work table when not gaming.

Modular terrain tables feature removable terrain tiles that fit into a grid on the table surface. Each tile is a section of terrain — a hill, a river, a building foundation, a road — that can be swapped and rearranged to create different battlefields. This approach requires more initial construction time but provides virtually unlimited battlefield variety.

Built-in lighting dramatically enhances the gaming atmosphere. LED strip lights attached under the table lip provide ambient lighting. Spot lights directed at the playing surface from above give even, shadow-free illumination that makes painted miniatures look their best. Smart LED strips that change colour can set different moods for different game scenarios.

Frequently Asked Questions

How much does it cost to build a wargaming table?

It depends heavily on where you live and current timber prices. As a rough guide, a basic 4×6-foot table in MDF and softwood typically costs somewhere around £80 to £150 (or a similar amount in US dollars) in materials. MDF sheets and dimensional lumber are the main costs. Adding storage shelves, a gaming mat and lighting can push a fully equipped table to roughly £200 to £400. Price up your materials locally before you start.

What tools do you need?

Essential tools include a drill/driver, a saw (circular saw or hand saw), measuring tape, square, sandpaper, and clamps. A mitre saw makes cleaner cuts but is not strictly necessary. All other tools are optional quality-of-life improvements. Many hardware stores will cut MDF and lumber to your specifications for a small fee if you lack a saw.

Can you build a folding wargaming table?

Yes. Use folding table legs (available from hardware stores) or build a hinged frame that folds flat. The surface can be built in two halves with a piano hinge along the centre. Folding tables are ideal for players with limited space who need to store the table when not in use.

How long does it take to build a wargaming table?

A basic table can be built in a single weekend — one day for frame construction and one day for surface finishing. More elaborate tables with recessed playing surfaces, built-in storage, and custom terrain features may take a week or more, depending on your skill level and the complexity of the design.

Can you play Warhammer on a dining table?

Yes, as long as it is big enough. A standard 40k (Incursion or Strike Force) or Age of Sigmar game uses a 44×60-inch (about 110×152 cm) battlefield, so the table must be at least that size. Lay a gaming mat or MDF board on top to protect the wood and stop terrain sliding. Smaller formats like Combat Patrol, Spearhead and Kill Team fit on most family dining tables.

How do you build a city board for Warhammer 40k?

Start with an urban gaming mat or a painted board with roads and building foundations, then add ruined buildings as the main line-of-sight blocking terrain. Gothic ruins kits, 3D-printed or MDF ruins, and scatter like barricades and crates fill the gaps. Leave clear lanes for vehicles and enough space between ruins for large models to move through. In 11th Edition, objectives are terrain areas rather than markers, so use the recommended layouts in the Warhammer 40,000 app as a starting point for where your terrain goes.

How big is a Warhammer gaming table in cm?

In 11th Edition, a standard Warhammer 40k battlefield is 44×60 inches, about 110×152 cm, at both 1,000 and 2,000 points. Kill Team uses 22×30 inches, about 56×76 cm. If you are building a permanent table, a 120×180 cm (4×6-foot) surface fits a full game with room around the edges for dice, rulebooks and casualties.

Related Content