Part of our Deathwatch hub: every Deathwatch guide, lore page and painting tutorial in one place.
How to Paint Deathwatch — Step by Step Guide
Learning how to paint Deathwatch is one of the most rewarding challenges in the Warhammer hobby. The Deathwatch are known for their distinctive black armour, silver left arm and the heraldry of each Marine’s original Chapter, and mastering this colour scheme will give you a striking force that commands attention on any gaming table. Whether you are painting your first Deathwatch model or looking to improve your technique, this comprehensive guide walks you through every step of the process.
In this guide, we cover everything you need to know — from assembling your complete paint list, through base coating, shading, layering, and highlighting, all the way to basing and finishing touches. We also cover how to handle the Chapter shoulder pads and a few ways to vary the scheme. Every paint recommendation uses specific Citadel paint names so there is no guesswork involved.
Complete Paint List for Deathwatch
Before you start painting your Deathwatch army, gather these Citadel paints. Having everything ready before you begin will make the process smoother and more enjoyable.
| Paint Type | Paint Name | Purpose |
|---|---|---|
| Base | Abaddon Black | Primary armour/ base coat |
| Layer | Eshin Grey | Primary colour layer |
| Layer | Dawnstone | Edge highlights |
| Base | Leadbelcher | Silver arm and metallics base |
| Layer | Ironbreaker | Silver arm and metallics midtone |
| Layer | Stormhost Silver | Silver arm highlight |
| Base/Layer | Retributor Armour | Tertiary details base |
| Layer | Liberator Gold | Tertiary details layer |
| Layer | Auric Armour Gold | Tertiary details highlight |
| Layer | Runefang Steel | Metallic edge highlight |
| Shade | Nuln Oil | Armour and metallic shade |
| Shade | Agrax Earthshade | Detail shade |
| Spray | Chaos Black / Mechanicus Standard Grey | Primer |
Step-by-Step Painting Guide
This guide breaks down the process of painting Deathwatch into manageable steps. Whether you are batch painting a full army or lavishing attention on a single character model, these steps will help you achieve a striking Deathwatch scheme that looks fantastic on the tabletop.
Step 1: Preparation and Priming
Begin by cleaning all mould lines from your Space Marines using a sharp hobby knife or mould line remover tool. Dry-fit all components before gluing to ensure proper alignment. For subassembly painting, consider keeping shields, backpacks, or weapons separate — this gives you better access to recessed areas that would otherwise be difficult to reach.
Prime your models with Chaos Black spray primer for this colour scheme. Hold the can approximately 20-30cm away and apply several thin, sweeping passes rather than one heavy coat. Allow the primer to cure fully for at least 30 minutes before handling. If you spot any areas the primer missed, touch them up with Abaddon Black applied with a brush.
A black primer works perfectly for Deathwatch because it naturally creates shadows in the recesses and provides an excellent foundation for the black armour.
Step 2: Base Coating the Primary Colours
Apply Abaddon Black to all the primary armour panels/ surfaces. Use a medium-sized base brush (such as a Medium Base brush from Citadel) and apply two thin coats rather than one thick coat. Allow each coat to dry fully before applying the next — this prevents the paint from obscuring surface detail.
When applying the base coat, use smooth, controlled brush strokes that follow the contours of the model. Load your brush with paint, then wick off the excess on your palette until the paint flows smoothly without pooling. You want complete, even coverage while still being able to see the underlying sculpted details.
At this stage, do not worry about being perfectly neat. Focus on getting solid, opaque coverage on all the primary surfaces. You will clean up any mistakes in later steps.
Step 3: Shading and Washes
Once your base coats are fully dry, apply Nuln Oil shade to the primary surfaces. This is where your Deathwatch models really start to come alive. The shade paint flows into recesses, panel lines, and joints, creating natural-looking shadows that add tremendous depth.
Apply the shade with a medium shade brush, guiding it into the recesses rather than slathering it over flat panels. For a cleaner result, use the recess shading technique — carefully apply the shade only into the deepest recesses using a fine detail brush. This takes longer but produces a much smoother finish on the raised surfaces.
Use Nuln Oil on the silver arm and other metallic areas, and Agrax Earthshade on cloth, leather, and flesh areas. Allow all shades to dry completely before proceeding — rushing this step will cause the shade to lift when you paint over it.
Step 4: Layering and Building Up Colour
Now layer Eshin Grey over the primary surfaces, leaving the shade visible in the recesses. This is the most important step for creating a polished look. Load your brush with a small amount of paint, and apply it to the raised areas and flat panels while carefully avoiding the shaded recesses.
Apply Ironbreaker to the silver arm and the other metallic areas such as weapon casings, focusing on the raised surfaces while leaving the darker Leadbelcher and shade visible in the recesses. This creates a convincing metallic sheen that catches the light naturally. For gold details such as aquilas and purity seal clasps, use Liberator Gold in the same fashion.
The key to good layering is patience. Use thin paint, a steady hand, and build up opacity gradually. Two thin layers will always look better than one thick one.
Step 5: Edge Highlighting
Edge highlighting is what separates a good paint job from a great one, and it is especially important for Deathwatch. Using a fine detail brush, apply Dawnstone to the edges of all armour panels. Focus on the most prominent edges — the ones that would naturally catch the light.
On the silver arm, apply Stormhost Silver to the edges, and use Auric Armour Gold on the gold details. On metallic areas, use Runefang Steel for the finest highlights on rivets, bolt heads, and the sharpest edges.
Hold your brush perpendicular to the edge and drag it lightly along — the paint should only catch on the very edge of the surface. If you apply too much, you can always go back with the layer colour to tidy up. Practice on a less visible area first if you are not confident.
Prioritise the edges that face upward, as these catch the most light when the model is viewed on the tabletop. Downward-facing edges can be left darker for a more natural appearance.
Step 6: Basing and Final Details
A well-painted model deserves a well-finished base. Apply Stirland Mud or Astrogranite Debris texture paint to the base, depending on whether you want an earthy or urban look. Once dry, dry brush with Tyrant Skull or Longbeard Grey to bring out the texture.
Add tufts of static grass or small rocks for visual interest. Paint the base rim with Abaddon Black or Steel Legion Drab for a clean finish.
Finally, apply any transfers or decals. Soften them with Micro Sol and Micro Set for a painted-on look. Add final details like eye lenses (use a bright colour like Moot Green or Evil Sunz Scarlet with a white dot for reflection) and any purity seals or scrollwork.
Seal your finished models with a matte varnish spray to protect your hard work during gaming.
Pro Tips for Painting Deathwatch
- Batch painting: Paint 5-10 Space Marines at a time for maximum efficiency. Complete each step across all models before moving to the next step — this keeps your paint consistency uniform and speeds up the overall process.
- Wet palette: Use a wet palette to keep your paints workable for longer. This is especially important when layering, as you need consistent paint thickness across the entire model.
- Brush care: Clean your brushes regularly during painting sessions and reshape the tips before storing. A good brush makes edge highlighting significantly easier.
- Subassembly: For character models or larger vehicles, paint components separately before assembly. This makes it much easier to reach all the details.
- Thin your paints: The golden rule of miniature painting applies doubly to Deathwatch. Thin coats preserve detail and create smoother transitions between colours.
Chapter Shoulder Pads and Variations
What makes a Deathwatch army unique is that every Marine is seconded from a different Chapter, so no two squads need look the same. A few practical ways to handle that:
Chapter Heraldry
The Chapter pad is the most time-consuming part of each model. Pick a handful of Chapters you enjoy painting and reuse their colours from the rest of your collection: for example Macragge Blue for an Ultramarines pad, Mephiston Red for Blood Angels or White Scar over Celestra Grey for White Scars or Black Templars icons. Paint the pads off the model where you can, then glue them on once both parts are finished. Transfers or the upgrade shoulder pads from the Deathwatch range save a lot of freehand.
Characters and Veterans
Watch Masters, Watch Captains and other characters suit extra gold. Use the Retributor Armour, Liberator Gold and Auric Armour Gold steps from the paint list on trim, purity seal clasps and iconography, and add Rakarth Flesh layered up to Pallid Wych Flesh for parchment on purity seals. Keeping the gold on characters only makes them easy to pick out on the table.
Weapon Casings
Most Deathwatch painters keep weapons black or metallic, but a spot colour on bolter casings or special weapons is an easy way to add contrast to an otherwise monochrome army. Any colour from your Chapter pads works; repeating one accent across the whole force ties the mixed heraldry together.
Frequently Asked Questions
What primer should I use for Deathwatch?
Chaos Black spray primer is the best choice for Deathwatch, since most of the model ends up black. It provides natural shadows and works as the deepest shade colour. For lighter alternative schemes, consider Grey Seer or Wraithbone primers instead.
How long does it take to paint a Deathwatch army?
A tabletop-ready Deathwatch army of around 2,000 points typically takes 40-80 hours depending on your skill level and the standard you are aiming for. Batch painting in groups of 5-10 models is the most efficient approach. A single model to a high display standard can take 5-15 hours.
Can I use Contrast paints for Deathwatch?
Yes, Contrast paints can significantly speed up the painting process. For Deathwatch, try Black Templar or the closest Contrast equivalent over a Grey Seer or Wraithbone primer. While the results differ from traditional layering, Contrast paints produce excellent tabletop-quality results in a fraction of the time.
What are the most important colours to buy first?
Start with the essentials: Abaddon Black, Eshin Grey, Nuln Oil, and Leadbelcher. These four paints alone will let you get a solid base-coated and shaded army on the table. Add the highlight and accent colours as your budget allows.
How do I paint the eyes on Deathwatch models?
Paint the eye socket with Abaddon Black first, then carefully dot in the eye lens colour — Moot Green is classic for many factions, or Evil Sunz Scarlet for a more aggressive look. Add a tiny dot of White Scar in one corner for a reflective gleam. Use the finest brush you have and brace your painting hand against the model for stability.
Should I use an airbrush for Deathwatch?
An airbrush is excellent for base coating large surfaces quickly and creating smooth colour transitions, especially useful for vehicles and Dreadnoughts. However, it is absolutely not required — every technique in this guide can be accomplished with standard brushes. If you do use an airbrush, it pairs brilliantly with zenithal priming for natural lighting effects.
Which shoulder pad is silver on Deathwatch?
The left. Deathwatch Marines wear black armour with the left arm and shoulder pad in silver, marking their service to the Deathwatch and the Ordo Xenos. The silver left pad bears the Deathwatch’s own symbol, while the right pad carries the heraldry of the Marine’s original Chapter; the Deathwatch Veterans kit includes Deathwatch left pads and Chapter-specific right pads. Transfers or upgrade parts make the Chapter pads much quicker than freehand.
How do you stop black armour looking grey?
Keep your highlights thin and limited to edges. Black armour looks grey when lighter colours cover too much of each panel. Leave most of the panel Abaddon Black, use Eshin Grey only on the edges and Dawnstone on the sharpest points. A satin or gloss varnish on the armour also makes black look deeper.
Learn More About Deathwatch
Now that you know how to paint your Deathwatch army, make sure you understand how to play them on the tabletop. Check out our comprehensive Deathwatch faction guide for army lists, strategies, and tactics that will help you dominate your games of Warhammer 40,000.
Related Content
- Deathwatch — Explore the full army guide
- Warhammer Painting for Beginners — Start with general painting tips
- Best Paints for Warhammer — Choose the right paints for your scheme
- How to Paint Space Marines — Learn core Space Marine painting techniques
