How to Paint Helsmiths of Hashut: Bronze, Purple & Daemonfire

How to paint Helsmiths of Hashut

The Helsmiths of Hashut are the Chaos duardin who serve Hashut, the Father of Darkness, and they’re one of the newest armies in Age of Sigmar. Their models are packed with armour, chains, horns and furnaces full of trapped daemons. That looks intimidating, but it’s actually great news for beginners: metal armour is one of the easiest things to paint well. This guide shows you how to paint the Infernal Cohort step by step, then covers daemonfire, war engines, alternative schemes and a fast route for new painters.

If you’re starting the army, our Helsmiths of Hashut Spearhead guide explains the Helforge Host box: a War Despot, ten Infernal Cohort, a Dominator Engine and a Tormentor Bombard.

The Official Scheme in Brief

Games Workshop designed the Helsmiths around purple, the colour of Hashut in their culture. In Warhammer Community’s ‘Eavy Metal round table, the studio’s armour is a dark bronze tinted with burgundy, with brass trims, deep purple cloth and daemonfire that starts as a vivid green and shifts into purple and black. Warhammer Community’s War Despot video describes this box-art look as the Forge Anathema scheme. It’s a big change from the red, black and brass of the old Chaos Dwarfs, though that classic look is still a great alternative (see below).

What You Need

Citadel paints are now sold as Warhammer Colour, with the same pot names. Most of the metals below are the same ones the ‘Eavy Metal team used, just simplified.

AreaClassic paintsContrast / Speedpaint alternative
PrimerChaos Black sprayLeadbelcher spray for a faster metal start
ArmourWarplock Bronze, Sigvald Burgundy glaze, Castellax Bronze, Stormhost SilverA bronze Speedpaint metallic plus a purple wash
Brass trimRunelord Brass, Agrax Earthshade, Stormhost SilverA gold Speedpaint metallic
Purple clothNaggaroth Night, Druchii Violet, Xereus PurpleShyish Purple (Contrast) or Hive Dweller Purple (Speedpaint)
DaemonfireWhite Scar, Aeldari Emerald, Luxion PurpleSame (they’re Contrast paints)
SkinBugman’s Glow, Reikland Fleshshade, Kislev FleshDarkoath Flesh (Contrast) or Crusader Skin (Speedpaint)
BeardsAbaddon Black, Mechanicus Standard Grey, DawnstoneBlack Templar (Contrast)
Obsidian and black stoneAbaddon Black, Dawnstone edge, ‘ArdcoatGrim Black (Speedpaint) plus gloss
BaseMartian Ironearth or Mordant Earth, AstrograniteSame

Step by Step: Infernal Cohort

1. Prime

Clean the mould lines and prime with Chaos Black. Black primer suits dark metal armour. If you want to save time, spray Leadbelcher from above afterwards so the armour is already metallic.

2. Basecoat the armour

Paint all the armour with Warplock Bronze, a dark, reddish bronze. Two thin coats are better than one thick one.

3. Tint the armour purple

This is the step that makes your army look like Helsmiths and not generic bronze. The ‘Eavy Metal team mixed Warplock Bronze 1:1 with Sigvald Burgundy for their base. An easier version is to glaze thinned Sigvald Burgundy (or Druchii Violet shade) over the dry bronze. The metal shows through, but now it has a purple-red tint.

4. Basecoat the details

  • Trim, rivets and Hashut symbols: Runelord Brass.
  • Cloth and sashes: Naggaroth Night.
  • Skin (faces and hands): Bugman’s Glow.
  • Beards: Abaddon Black.
  • Weapon blades: Leadbelcher.
  • Daemonfire and glowing areas: White Scar (two coats so it’s really bright).

5. Shade

Wash the trim with Agrax Earthshade, the cloth with Druchii Violet and the skin with Reikland Fleshshade. Use Nuln Oil on the blades. If the armour has lost its depth, add a little Nuln Oil into the deepest recesses.

6. Highlight

  • Armour: a light drybrush of Castellax Bronze over the raised plates, then edge highlights of Stormhost Silver on the sharpest corners and rivets. ‘Eavy Metal saved pure Stormhost Silver for rivets and extreme corners, which makes the armour look heavy and forged.
  • Trim: an edge of Stormhost Silver.
  • Cloth: Xereus Purple on folds.
  • Skin: Kislev Flesh on the nose, cheeks and knuckles.
  • Beards: drybrush Mechanicus Standard Grey, then a very light pass of Dawnstone on the tips.

7. Daemonfire

See the next section. Paint it last so the bright colours stay clean.

8. Base

The Helsmiths live in volcanic, ash-covered lands. Use Martian Ironearth for a cracked, scorched ground or Mordant Earth for dark ash. Add a few glowing cracks for extra drama with our lava base guide.

Signature Parts

Daemonfire

Daemonfire is the eye-catcher of the army: the trapped daemon energy in weapons, furnaces and war engines. The studio version is a green flame that fades through purple to black.

  1. Paint the area White Scar (or Corax White).
  2. Coat it with Aeldari Emerald (Contrast). It settles darker in the recesses, which gives you a gradient for free.
  3. Glaze Luxion Purple onto the tips of the flames and the edges furthest from the source.
  4. Dot pure white back into the hottest centre.
  5. Optional: brush a little thinned green onto nearby armour so the fire seems to light it.

Our flames guide and glow without an airbrush guide go further.

Bronze that looks forged

Metal armour gets its depth from contrast. Keep the recesses dark, the flat plates mid-tone, and only the sharpest edges bright silver. For battered war engines, add verdigris to the brass with our verdigris guide, or rust streaks with our rust guide.

Obsidian and black stone

Obsidian looks like black glass. Paint it Abaddon Black, edge highlight it with a cool grey like Dawnstone, add a tiny white dot or line on the brightest point, then coat it with ‘Ardcoat gloss varnish. In Warhammer Community’s team painting article, Rik used ‘Ardcoat over his dark armour to get exactly this obsidian look.

War engines

The Dominator Engine and Tormentor Bombard are mostly metal, which makes them faster to paint than they look. Prime them black, spray Leadbelcher from above, then use the same armour steps on the plates. Put your extra effort into the furnace glow and the crew. Paint large sub-assemblies separately if you can. Our large models guide explains how.

Stuck on a paint scheme? Roll a colour scheme with Citadel paint suggestions.
Generate a scheme →
Share:

Alternative Colour Schemes

Warhammer Community has shown several other schemes, and the army’s subfactions (Forge Anathema, Scorched Sect, Zharr Vyxa and Muspelzharr) have inspired painters to try their own takes.

Alternative 1, Classic Chaos Dwarf: black or dark iron armour, brass trim, red cloth and orange-yellow fire. Use Leadbelcher with a Nuln Oil wash, Runelord Brass trim, Khorne Red cloth and fire painted with Gryph-Hound Orange over white. It’s the look many veteran painters remember.

Alternative 2, Muspelzharr black and gold: black armour with gold trim and a yellow sash, as in Tale of Painters’ Muspelzharr tutorial. It’s very striking and simple: black armour, gold edges and one bright yellow accent.

Alternative 3, Copper Furnace: warm copper armour. Rik from the Warhammer Community team primed black, sprayed Leadbelcher from above, coated it with Gryph-Hound Orange and drybrushed Hashut Copper and Sycorax Bronze. It’s fast and looks freshly forged.

Speed-Painting Route for Beginners

  1. Prime Chaos Black, then spray Leadbelcher from above.
  2. Armour: a glaze of Sigvald Burgundy, then drybrush Castellax Bronze.
  3. Trim: Runelord Brass and a wash of Agrax Earthshade.
  4. Cloth: Shyish Purple over a quick dab of white.
  5. Beards: Black Templar. Skin: Darkoath Flesh.
  6. Daemonfire: White Scar, then Aeldari Emerald.
  7. Base: Mordant Earth and a painted rim.

That’s a battle-ready Infernal Cohort with almost no highlighting. Our Contrast paints guide and speed-painting guide have more shortcuts.

Common Mistakes

  • Painting bright fire over a dark colour. Daemonfire only glows over white. Basecoat it first.
  • Too much silver. If every edge is bright, the armour looks like plastic. Keep the brightest highlights for corners and rivets.
  • Skipping the purple tint. Without it, your army can look like generic bronze duardin. One glaze makes them clearly Helsmiths.
  • Thick metallic paint. Metals clog detail quickly. Thin them and use two coats.
  • Forgetting the gloss on obsidian. Matt black looks like rubber. A touch of ‘Ardcoat makes it glassy.

See common painting mistakes for more.

FAQ

What colours are the Helsmiths of Hashut?

The official scheme is a dark, purple-tinted bronze armour with brass trim, purple cloth and green daemonfire that fades into purple and black. Warhammer Community describes it as the Forge Anathema scheme.

What primer should I use for Helsmiths?

Chaos Black is best for dark metal armour. Spray Leadbelcher from above afterwards for a quick metallic start.

How do I paint daemonfire?

Paint it white, coat it with Aeldari Emerald, then glaze the tips with Luxion Purple and add a white dot at the centre.

Can I paint Helsmiths in the old Chaos Dwarf colours?

Yes. Red, black and brass is a popular alternative, and many painters prefer it. Painting your army in your own colours is part of the fun.

Are the war engines hard to paint?

Not really. They’re mostly metal, so a black primer, a Leadbelcher spray, a purple glaze and a bronze drybrush do most of the job. Spend your time on the glowing furnaces and crew.

Should I varnish my Helsmiths of Hashut?

Yes, if you’ll play with them. Heavily armoured models get handled a lot, and metallic paint rubs off edges quickly. A matt varnish will dull the bronze and brass a little, so many painters use a satin varnish instead, or varnish the whole model matt and then add ‘Ardcoat back onto the obsidian, gems and the brightest metal. Varnish before you add any final gloss effects.

How long does it take to paint a unit of Infernal Cohort?

With the speed-painting route in this guide, a unit of ten can be painted to a battle-ready standard in a few evenings, because a Leadbelcher spray, a burgundy glaze and a bronze drybrush do most of the armour. The full step-by-step method with edge highlights takes noticeably longer. Batch painting all ten together, one step at a time, is the quickest way through either approach.

Related Guides